Air Conditioning Installation: It's Not As Difficult As You Think
Before starting, you need to take certain steps.
When you install your air conditioner in a correct manner, it will ensure safety and effectiveness. The frame or window on which the air conditioner is installed should be secured and clean.
Shut off electric
If you're planning to set up your AC system for the winter months or are installing a brand new unit, it is essential to turn off the power. This can protect the person from shock and also keep your equipment free of surges in power.
The power supply for the exterior of your AC appliance is situated in the wall of your home, near the condenser. Remove the cover that protects it then flip the switch to the "off" place. The lid should be closed, then allow it to sit for a minimum of 30 minutes without moving to allow your circuit breakers reset.
This could take a long time, so make sure to take your time and wait for it to perform well before you can use the AC again.
If you're trying to take down an older AC unit, make sure you also turn the electricity off before you do so. Leaving the unit connected to the power source could make it overheat or freeze, and cause it to be damaged.
Another reason to switch off the electricity is in the event of power outages at your home. This reduces the demands for the electric system, that can to speed up the recovery process when electricity does come back on.
Installing a surge protection can protect your appliances from the harmful effects of power fluctuation. The cost can be high to set up a surge protector and the price is worthwhile if you wish to protect your equipment from damage caused by fluctuating power.
If you own a thermostat that you use to control the temperature of your heating or cooling systems, it's ac and heating installation an excellent idea to cut off power to the system. This will prevent your thermostat not turning on cooling while it resets its circuit breakers. The result will make the device more effective.
Make a call to an HVAC technician if you're not able to reset your breakers by yourself. They will also inspect the system for any issues which could have led to the breaker to go off initially.
Make sure the window is prepared
During air conditioner installation It is essential to prep the window, and ensure that it's in good condition to support the unit. The installation process will go more smoothly and the process of installation is smooth.
Start by checking your frame is free of rot and cracks. This reduces the chance of damage to your window, as well as making it hard to put in the air conditioner.
If you have any obstructions like storm windows and screens, remove them to make sure that you have a clear space around the window's opening. It's also a good idea to secure the frame of your window so that it's able to withstand the load of the AC.
After that, you should mark the horizontal center of the window with the help of a pencil to ensure that you are able to properly place your unit. This will spread equally across the strongest parts of the frame. The result is an ideal seal.
When you've found the perfect spot after locating the right spot, raise the window unit with an assistant's help then place it on the windowsill. Certain window units have both bottom and top mounting rails that help secure the air conditioner to the window. A few manufacturers even include accordion side panels to help bridge any gaps between the air conditioner as well as the window frame.
After the air conditioner has installed correctly it is now time to use the power screwdriver to secure the side panels as well as mounting rails to the proper position. Use the guidelines given by the company. The components are designed to hold the air conditioner's window in the correct position, as well as help to keep it in position during the entire installation process.
Installing the air conditioner is after the mounting rails or side panels, as well as the other elements are in place. The weather strip on some air conditioners prevents the incoming cold air from reaching your window and causing the window to become damaged.
These brackets are included in some models to help protect the air conditioner from the bottom of the window. They are an extra security device to protect the air conditioner from falling off.
If the air conditioner is firmly in place, close the door. One last thing to do prior to utilizing the benefits of your AC is shutting the windows.
The Installation of the Indoor Unit
When installing an air conditioning unit, it is important to comply with the specifications of the manufacturer, and make sure the indoor unit is secured. This ensures that the system is properly working and will not break into pieces in the near future.
After the mounting plate has been secured to the wall, your engineer will create holes into the wall to allow the wire and piping from the indoor unit to go through. Then, they will connect the outside unit in accordance with specifications provided by the manufacturer.
Engineers will connect to a control wire at low voltage in order to switch it off and on. Also, you can adjust the temperature in your room with the remote.
A technician will connect the refrigerant line to the outside unit. It is vital that refrigerant lines are correctly connected through the outdoor coil and to the condenser outside so that there is no leakage or breakdown.
The technician will then create suction pipes that go from the AC to the air ducts inside the house. The line set will be connected to the air conditioner's service valve. The valve functions as the connector for the line-set and also isolating the refrigerant in the event that there are any future issues.
The technician will put in one if your residence doesn't have one. This makes it simpler for them to maintain the new AC to come back.
Once the air conditioner is installed, you should switch it on and verify that it's operating as planned. The unit should instantly cool your room and make you feel comfortable.
Verify that the thermostat functions as it should. The thermostat might not be functioning properly and could result in your AC operating more frequently than it needs to.
The technician show you how to manage and operate your equipment. You will feel more confident about the process and installing company. It also gives you an chance to inquire about all issues that came up during the installation process.
Make the Outdoor Unit
The outside unit is where the compressor of your air conditioner and condenser is located. It also houses the refrigerant that serves to draw heat and moisture out of your house's air. It could be affixed to your roof, or placed directly on the ground, using specialized equipment.
The position of your outdoor unit is vital for a more efficient operation and greater longevity. An experienced HVAC technician can assist you to select the most suitable location to install your unit.
Strategically positioning the outdoor unit can help your AC unit run more effectively and save you money on expenses for energy. It is recommended that the unit is best placed in a south or north facing wall in order to get maximum cooling. The best option is to stay clear of east and west facing walls since these are more exposed to sun in the summer months, which makes your air conditioner run harder. Also, this can increase energy bills.
If you are installing your outdoor unit, be sure the unit isn't blocked by plants or other things that might hinder the flow of air. You should also keep it out of places with dusty or hot areas, since they may affect your unit's performance.
Join the pipe and cable which connect to the indoor unit. This can be a complicated procedure, so we advise employing a professional to handle this for you.
Daikin's specialist dealers can assist you in determining where you should place the outside unit and also provide instructions for connecting the pipes. This could include a connection to the line set as well as a service valve.
The cable and piping should be secured as recommended by the manufacturer's product manual. It's also a good idea to put on covers since the cables will be exposed to the elements.
You can also install the composite pad instead of concrete ones to lessen sounds and vibrations. The pad made of composite is likely to last twice as longer that the exterior unit while avoiding the expense of repairs and replacements.
Think about attaching the unit the structure that is already there like an outdoor patio or deck. This can stop the unit from moving during summer, and it won't damage your property.
